Multi Process Machines:

Lincoln Electric POWER MIG 210 MP Multi-Process Welder Aluminum One-Pak – K4195-1

For those looking primarily for a MIG machine that has the option for DC TIG the MP210 is a great combo machine

VERSATILE, RUGGED, SIMPLE TO USE.

The POWER MIG® 210 MP power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to do MIG welding and a lot more, including stick, TIG and flux-cored welding. The push-and-turn digital controls and color display screen make setup and operation intuitive and easy, while the all-metal wire drive and sturdy sheet-metal construction make it rugged and ready for any job in the home or small shop. The POWER MIG 210 MP power supply is the ideal MIG machine for the welding novice, with plenty of room to grow as you gain more experience.

ONE POWERFUL MACHINE

Take it Everywhere, Plug in Anywhere.™

  • Lightweight and portable – just 40 lbs.!
  • Dual Voltage Inputs (120V or 230V) means you can plug into any common power supply


Ready. Set. Weld®.

  • Intuitive push-and-turn digital controls make setup a breeze
  • Large color display guides you through the setup process
  • Advanced options and settings are simple to access


210 Amps: The power to tackle any job

  • MIG: Weld up to 5/16 in. mild or stainless steel or aluminum* up to 3/16 in.
  • Flux-Cored (Self- and Gas-shielded): Tackle the biggest jobs
  • DC Stick: Handles up to 5/32 in. stick electrodes
  • DC TIG: Enabled by Touch Start TIG® technology

Everlast PowerMTS 211Si MIG TIG Stick 200amp 110v/220v Multi Process Welder

If you are looking for an all around performer in the your fab shop, or need a go to unit on the work site, the PowerMTS 211SI has more than enough capability to handle most daily chores. As one of the newest multi-process welders in the Everlast PowerMTS line, the unit has been completely redesigned with the user in mind. This new digital inverter model features all the capability of previous generations but also adds synergic capability to the MIG component of the MIG/TIG/Stick welder. The synergic offers quick setup and use of the welder based off of user input of wire diameter and metal type. Manual override is always a choice when operating the unit in the Synergic mode so that the operator can fine tune the settings to the perform to his or her expectations. The unit features a standard MIG mode as well and setup is fully controlled by the operator. The welder is also equipped with a synergic spool gun mode for those that need it. Minimum/Maximum: MIG: Weld up to a maximum of 3/8″ single pass* Weld up to a maximum of 5/8″ multi-pass Weld a minimum of 24 gauge * Single pass welds greater than 1/4″ are not recommended as a sound welding technique. TIG: Weld up to a maximum of 1/4″ single pass Weld up to a maximum of 5/8″ mult-pass Stick Weld with a maximum of 1/8″ diameter electrode Weld with a minimum of 1/16″ diameter electrode INCLUDES: 10 ft. Trafimet Series 15 MIG torch with Euro style quick connect fitting Stick electrode holder with 10 ft cable and 35 series DINSE-style connector Work clamp with 10 ft. cable and 35 series DINSE-style connector 12 ft. 26 Series TIG torch with cable and 35 series DINSE-style connector Spare consumable starter kit (does not include tungsten) Ar/CO2 Gas Regulator